ELNEC编程器BEEPROG2产品介绍
ELNEC是优质的NAND闪存、微控制器和其他可编程设备编程解决方案供应商。
ELNEC致力于通过为任何封装的设备提供高度通用、可靠和经济高效的编程解决方案，无论是在插座中编程还是通过电路板上的 ISP 进行编程，从而在行业中树立新标准。
ELNEC编程器BEEPROG2 DATAMAN-48PRO2介绍
extremely fast programming.
Sustainable programming speed greater than 5 MBytes per second.
Programs 2 GB eMMC NAND Flash in less than 365 sec.
48-pins powerful pindrivers, no adapter required for any DIL devices
ISP connector for in-circuit programming
dual connection to PC: USB (up to 480 Mbit/s) or parallel (printer) port
USB 2.0 (high speed, full speed) and 1.1 compatible interface
alternatively high-speed IEEE 1284 (ECP/EPP) printer-port (LPT) interface
comfortable and easy to use control program, works with all versions of MS Windows from Windows XP to Windows 10 (32-bit and 64-bit*)
Multiprogramming possible by attaching more programmers to one PC
极快的编程。
可持续编程速度大于每秒 5 MB。
在不到 365 秒的时间内编程 2 GB eMMC NAND 闪存。
48 针功能强大的引脚驱动器，任何 DIL 设备都不需要适配器
用于在线编程的 ISP 连接器
与 PC 的双重连接：USB（高达 480 Mbit/s）或并行（打印机）端口
USB 2.0（高速、全速）和 1.1 兼容接口
或者高速 IEEE 1284 (ECP/EPP) 打印机端口 (LPT) 接口
舒适且易于使用的控制程序，适用于从 Windows XP 到 Windows 10（32 位和 64 位*）的所有 MS Windows 版本
通过将更多编程器连接到一台 PC 可以实现多道程序设计
ELNEC编程器产品介绍
BeeProg2 is next member of USB/LPT-compatible, MS Windows (from Windows XP to Windows 10, 32-bit and 64-bit) based Elnec universal programmers, built to meet the strong demand of the small manufacturing and developers community for the fast and reliable universal programmer.
BeeProg2 programmer is the improvement of BeeProg+ programmer, difference is much higher programming speed (up to 10x) of high-capacity memories, due to more powerful programming core (FPGA) inside.
Supports all kinds of types and silicon technologies of today and tomorrow programmable devices without family-specific module. You have freedom to choose the optimal device for your design. Using built-in in-circuit serial programming (ISP) connector, the programmer is able to program ISP capable chips in circuit.
BeeProg2 isn't only a programmer, but also a tester of TTL/CMOS logic ICs and memories. Furthermore, it allows generation of user-definable test pattern sequences.
Extremely fast programming due to high-speed FPGA driven hardware and execution of time-critical routines inside of the programmer. As a result, when used in manually-operated production, this one-socket-programmer in most cases waits for an operator.
BeeProg2 interfaces with any IBM PC compatible personal computers, running MS Windows OS, through USB (2.0 HigSpeed) port or any standard parallel (printer) port. Support of both USB/LPT port connection gives you the choice to connect the BeeProg2 programmer to any PC, from latest notebook to older desktop without USB port.
BeeProg2 是 USB/LPT 兼容、基于 MS Windows（从 Windows XP 到 Windows 10、32 位和 64 位）的 Elnec 通用编程器的下一个成员，旨在满足小型制造商和开发人员社区对快速和可靠的通用程序员。
BeeProg2 编程器是 BeeProg+ 编程器的改进，不同之处在于大容量存储器的编程速度更高（高达 10 倍），由于内部编程内核（FPGA）更强大。
支持当今和未来可编程设备的各种类型和硅技术，无需特定的模块。可以自由地选择最佳设备。使用内置的在线串行编程 (ISP) 连接器，编程器能够在电路中对具有 ISP 功能的芯片进行编程。
BeeProg2 不仅是一个编程器，还是一个 TTL/CMOS 逻辑 IC 和存储器的测试器。此外，它还允许生成用户可定义的测试模式序列。
由于高速 FPGA 驱动的硬件和在程序员内部执行时间关键的例程，因此编程速度极快。因此，当用于手动操作的生产时，这种单插槽编程器在大多数情况下需要等待操作员。
BeeProg2 通过 USB (2.0 HigSpeed) 端口或任何标准并行（打印机）端口与任何 IBM PC 兼容个人计算机连接，运行 MS Windows 操作系统。支持 USB/LPT 端口连接，您可以选择将 BeeProg2 编程器连接到任何 PC，从最新的笔记本电脑到没有 USB 端口的旧台式机。
ELNEC编程器其他常用型号：
ELNEC BEEPROG2
ELNEC DATAMAN-48PRO2
ELNEC BeeProg3
ELNEC BeeProg2AP
ELNEC BeeProg2C
ELNEC SmartProg2