ANSUL继电器模块435358技术参数及介绍
ANSUL防火产品于1939年推出市场，其中包括第一个筒式单向阀灭火器。ANSUL的产品工程师与许多行业携手合作，保护他们的人身和财产免受火灾。
ANSUL主营产品应用：
ANSUL灭火器
ANSUL手动线路单元
ANSUL火灾探测系统
ANSUL干化学灭火器
ANSUL泡沫灭火器
ANSUL气体灭火器
ANSUL继电器模块435358技术参数
|
Maximum ANN-BUS Voltage:
|
24 VDC
|
|
Maximum Current: – Alarm:
|
75 mA Standby: 15 mA
|
|
Ambient Temperature:
|
32 ºF to 120 ºF (0 ºC to 49 ºC)
|
|
Relative Humidity:
|
93% ± 2% RH (non-condensing) at 90 ºF ± 3 ºF (32 ºC ± 2 ºC)
|
|
For use indoors in a dry location
|
|
Connections to AUTOPULSE 542R/542D Control Panel are power-limited and supervised.
|
|
Relay Contact Ratings:
|
2 Amps @ 30VDC (Resistive) 0.5 Amps @ 30VAC (Resistive)
|
ANSUL继电器模块435358介绍
当与兼容的AUTOPULSE 542R/542D控制面板一起使用时，ANN-RLY继电器模块提供十 (10)个可编程的C型继电器。ANN-RLY 模块可以安装在 AUTOPULSE 542R/542D 控制面板主电路板机箱内或使用可选的安装支架部件号435897安装在外壳的电池区域。
ANN-RLY和AUTOPULSE 542R/542D控制面板通过采用ANN-BUS通信格式的两线串行接口进行通信。额外的两根电线用于24伏直流电源。一根四芯非屏蔽电缆可用于电力和数据通信。
最多八(8)个ANN-BUS设备可以连接到AUTOPULSE 542R/542D控制面板的ANN-BUS。当超出可用面板功率时，ANN-BUS设备可以由辅助电源供电。
The ANN-RLY relay module provides ten (10) programmable Form-C relays when used with a compatible AUTOPULSE 542R/542D Control Panel. The ANN-RLY module may be mounted inside the AUTOPULSE 542R/542D Control Panel main circuit board chassis or in the battery area of the enclosure using optional mounting bracket Part No. 435897.
The ANN-RLY and the AUTOPULSE 542R/542D Control Panel communicate over a two-wire serial interface employing the ANN-BUS communication format. An additional two wires are used for 24-volt DC power. A single four-conductor unshielded cable may be used for both power and data communications.
Up to eight (8) ANN-BUS devices may be connected to the ANN-BUS of the AUTOPULSE 542R/542D Control Panel.ANN-BUS devices can be powered by an auxiliary power supply when available panel power is exceeded.
ANSUL继电器模块其他常用型号：
ANSUL 435358
ANSUL 437021
ANSUL 435897